3 3 Traxxas Carb Setting. Fits Traxxas TMaxx 3.3 490773 ENGINE TMAXX Jato Nitro Revo Ezstart Always use the factory settings for initial starting Notice the thin darker gray area between the low speed needle and the throttle arm..
Traxxas TRX 3.3 Rear Exhaust IPS Shaft, Standard Plug, Slide Carb from www.smalladdictionsrc.com
Always use the factory settings for initial starting To do this, use a small flat blade screwdriver to turn the high speed need clockwise until it bottoms out (do not over tighten the screw).
A) is flush (even) with the end of the slide (yellow in Fig Help! Carb settings for Traxxas 3.3! Can someone out there that's running a Traxxas 3.3 check thier carb settings on the low end and on the high end (how many turns out) for me please! I acquired a Traxxas truck in a. The post Traxxas Carb Settings appeared first on RC Car Action
Traxxas Carburetor Body (TRX 2.5, 3.3) [TRA5234] AMain Hobbies. A) is flush (even) with the end of the slide (yellow in Fig TRX 2.5, TRX 2.5R, & TRX 3.3 Racing Engine Factory Break-In (default) Carburetor Settings: High-Speed needle TRX 2.5, TRX 2.5R, and TRX 3.3 Racing Engines: A good starting point for the high-speed needle is 4 turns out (counter-clockwise) from closed.
NEW 3.3 TMAXX SLIDE CARB CARBURETOR REVO 5252 FOR TRAXXAS eBay. From there, the stock settings for the 2.5, 2.5R, and 3.3 engines are as follows: High Speed Needle: 4 turns counterclockwise We have found that higher-end (more expensive) engines tend to.